|
ST-58 Super Flush (1.65") Tilt Plasma/ LCD mount [ST-58]
VESA 300x200
VESA 300x300
VESA 400x300
VESA 400x400
VESA 500x400
VESA 500x500
VESA 600x400
VESA 600x600
 This mount also supports almost any 37" ,40", 42",46",47, 50" , 52", 55 & 58" (or any size in between) Plasma , LCD AND LED TV's in the market like:
o Panasonic, Panasonic Viera
o Sharp, Sharp Aquos
o Sony, Sony Bravia
o Samsung
o NEC , TOSHIBA , VIEWSONIC
o Fujitsu , PHILIPS
o Pioneer
o Akai
o SVA
o Hitachi
o Dell
o LG
o Olevia
o Vizio
o and many more.......Universal TILT for all Plasma and LCD & LED TV MountS.
Universal Super Flush, Adjustable Tilt PLASMA and LCD mount
Super Slim/ Flush Adjustable Tilt Plasma, LCD TV Wall mount
UniversalMounts universal Tilt St-58 wall mounts will work with most Plasma TV screen and LCD screens from 37" to 58". The super Flush Tilt design is easy to install and remove.
All necessary hardware is included for different wall types. Horizontal and vertical position adjustments allow perfect positioning of the screen regardless of the distance of wall studs.
KEY FEATURES:
- Your screen will be only 1.65" from the wall (most other Tilt Mounts are 2.5" to 3" from the wall)
- Adjustable Easy Tilt provides 0° to +12° angle of viewing
- Fits most 37", 40", 42", 46", 50", 55", 58" PLASMA , LCD & LED screens
- Supports up to 150 lbs
- Solid heavy-gauge steel construction
- Wide open Back Plate for all wire installations
- Easy to install with 31" back plate to support up to 2 studs (most mounts are only 28")
- TV can slide left to right on the 31" back plate, allowing you to center the TV on the wall up to 6"
- Supports up to 28.5" (730mm H) x 19.5" (500mm V) TV back Hole pattern
Compatibility: This universal wall-mount bracket is designed to fit flat-panel plasma and LCD screens from 37" to 58". The TV can have a maximum weight of 150 pounds.
Construction: The bracket is constructed of heavy-gauge steel.
Mounting: The wall plate must be anchored directly to wall studs using the supplied lag bolts. The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the TV to wall studs that are 16" or 24" on center. Once the wall plate is anchored to the wall studs and the TV rails (with the TV attached) are hooked onto the wall plate, the TV can slide left to right, allowing you to center the TV on the wall. After the TV is secured, it will be held approximately 1.6" from the wall.
TV Hole patterns Supported:
Horizontal 4" to 28.5" 100---730 mm
Vertical 4" to 19.5" 100---500 mm
WHAT’S IN THE PRODUCT’S BOX?
- 31" wide Back Wall plate
- 2 Tilt TV rails, 21" long each
- All necessary Screws for Wood Stud installation
- Manual
|
